Featured Post

OOS Investigation Tools: Streamlining Out-of-Specification Investigations

by
OOS Investigation Tools: Streamlining Out-of-Specification Investigations Out-of-specification (OOS) events are critical occurrences in pharmaceutical manufacturing, representing deviations from established specifications and potentially impacting product quality and patient safety. Efficient and thorough investigations are crucial to identify root causes, prevent recurrence, and ensure product compliance. This post explores essential tools that streamline OOS investigations. Key Tools and Examples of OOS investigation Tools: 1. Electronic Data Capture (EDC) Systems:   These systems are crucial for managing clinical trial data, but their principles of data integrity, audit trails, and secure storage are highly relevant to OOS investigations. Veeva Vault EDC: Veeva is a well-established name in the life sciences industry. Vault EDC is a cloud-based platform specifically designed for clinical data management. Its features like audit trails, electronic signatures, and version contro...
0

Sterilization and Preheating Difference

by

Sterilization and Preheating Difference

For biological and pharmaceutical dosage forms sterilization is required. sterilization is most important to prevent the external contamination of viable organisms which is to prevent microbial growth inside the dosage forms. There are many types of sterilization and are mentioned below. Microbial contamination is very dangerous, which can cause patient death. So this post prepared, to understand Sterilization and preheating differences.

Types of Sterilization:

  • Moist heat sterilization
  • Radiation sterilization
  • Dry heat sterilization
  • Gas sterilization
  • Chemical sterilization.
  • Filteration

Though the temperature is a determining factor for sterilization, there is a difference between sterilization temperature and preheating temperature.

What is a sterilization temperature? 

In normal cases, sterilization temperature is a temperature at which the microorganism present in the load are killed. Normally sterilization temperature is different for various methods of sterilization. For moist heat sterilizers, 121°C for 15 LBS pressure is a requirement. For dry heat sterilizers, more than 300°C are required for Depyrogenation. For heat-sensitive products again the temperature is reduced and exposure time is increased.

Sponsored Search:

  1. Difference Between Sterilization and Depyrogenation
  2. Steam Quality Test

What is preheating temperature?

However, preheating is required to achieve sterilization temperature. We cannot operate the autoclave which has temperature more. Hence during the load preparation phase, the temperature of the autoclave / or any sterilizer is cooled down. Again after loading articles for sterilization, the sterilizer will start to heat up to gain temperature. This is called as preheating.

See the below graph that will differentiate between sterilization temperature and preheating temperature. For sterilization to occur preheating temperature is a must. Then only it will raise to sterilization temperature. All the sterilizers are controlled through software, so as per the set program, the required temperature will raise automatically. It has the controls to stop the temperature also.

Sterilization and preheating difference
If you like the post please share n subscribe. it will motivate me to post more blogs. 

Thank You...!

Comments

Post a Comment

If you have any doubt please let me know. Thank you.